caulk

[wyndhy]

caulk application

tip: for best results, thoroughly clean the area that will be receiving the caulk.

pick up the caulk and pull on the cap until you see a small hole. with your dominant hand, firmly grip the caulk around the base of the dispenser. position the caulk’s dispensing hole at an angle against the crack that needs to be filled. be sure to press the tip firmly against the crack. squeeze gently but with an even pressure, moving the caulk along the crack beginning at the bottom.

after the caulk has sufficiently filled the crack, smooth by gently running a wet finger along the caulk.

allow to dry two hours before applying oil or latex.

for more tips on everyday household repairs go to youcandoit-wecanhelp.com

[FallenAngel5]

thanks? :)

[wyndhy]

round here caulk rhymes with sock. :D

[dreamgurl]

:blink:

[Pita]

:rofl: I loved that!

[osuche]

OMG....I need to spend more time at Home Depot. :rofl:

[rockintime]

OMG....I need to spend more time at Home Depot. :rofl:
Takes osuche to the wood aisle. ;)

[PantyFanatic]

Too funny Wyndhy :rofl:

[Teddy Bear]

A good read... lol.

TY wyndhy. ;)

[Lilith]

I really need some caulk

[Steph]

I love CAULK! :lurv:

[wyndhy]

yeah, me too. i was using alot of caulk yesterday and learned a few things. btw, i should have mentioned to you that when the caulk is ready for the latex or oil it will be firm but flexible. and be prepared for clean up. caulk gets everywhere! i had that sticky white stuff on my shirt, my legs, my arms. it even got in my hair. and my hands were totally covered in caulk. i had to use three towels to clean it all up and then take a shower.

[WildIrish]

Yeah...good caulk can be pretty messy. Sounds like you had your hands full. :D

[wyndhy]

i did! and there's still more to come. i'm going to have to use a lot of caulk in the bedroom soon. many a crack in there, lemme tell ya! they're begging for some caulk.

it's funny how nailing hard wood against a wall will leave so many cracks needing caulk.

[Aqua]

I've heard that sometimes a crack just needs a good screw to go with the caulk.

[wyndhy]

exactly, aqua! and make sure you screw it good and hard against the wall. you may just have to screw more than once. if you can, find a stud before screwing.

[WildIrish]

:confused:



You're not using caulk on your trim, are you?

[wyndhy]

no, wi. i'm using caulk on cracks.

[WildIrish]

no, wi. i'm using caulk on cracks.


Thank goodness! I'd hate to see your trim after it has caulk smeared all over it!











Not really...actually I'd like that. :slurp:

[wyndhy]

oh! well. the caulk does get on the trim. ooey-gooey gobs of it everywhere. that's where the wet finger i mentioned comes in. i agree, it is a sight to see.

[wyndhy]

and now that i think on it, wildi ~'because your question is important to me~ i recommend filling any holes in trim with a good wood filler. i find they fill the hole much better. a tighter fit, if you will. perhaps wood fillers expand after they are pushed in the hole.

[Aqua]

Very true wyndhy... fill in your cracks with caulk. But trim needs a good nailing, I mean really pounded good. Right after is when you want to get some good wood filler in there as well. Some people would go as far as to put a gloss coat over the trim.

[wyndhy]

good advice aqua. i'd add that if the wood is especially hard, screwing it against the wall would help. of couse that leaves a larger hole to be filled, but i believe wood filler would work well for that, too.

[Aqua]

And if possible, nailing it from the front while screwing it from behind would probably do the trick as well.

[wyndhy]

that, i think, would be overkill. you might end up splintering more delicate wood.

unless we are talking about body parts. then you might be onto something, aqua. of course, we aren't talking body parts here, just hardware and technique.

[WildIrish]

And if possible, nailing it from the front while screwing it from behind would probably do the trick as well.


gotta be real careful when doing that...the ends might come out the other sides!

[Aqua]

gotta be real careful when doing that...the ends might come out the other sides!
:yikes:

[Lilith]

Hardware is my life.

[Aqua]

Hardware is my life.
And what technique do you employ with your hardware?

[Lilith]

typically I am really into knobs

[WildIrish]

<<<----- has been called a knob plenty of times! :D

[wyndhy]

get back on topic! ^^^ :spank:

knobs! very nice touch on any repository, lil. especially ash, a nice and heavy, hard, strong and stiff wood. excellent bending qualities.

don't forget pre-drilling a hole is necessary before you can screw the knob.

[WildIrish]

oops...sorry wyndhy! :(


/me quickly diverts people's temporarily misguided attention to his pre-drilled knob

I've found that it's not the size of the screw that makes a knob effective, but the quality of the knob itself. My advice to anyone out there shopping around for knobs is to get the best one you can afford. I've yet to hear of anyone that's regretted that choice, whereas I've experienced firsthand the disappointment of having to abandon a cheap knob for what should've been acquired originally.

[Aqua]

Yes, surely you want to a knob that you can grip firmly since it needs to endure a lot of tugging. Some people like to have knobs that are purely for decoration but I feel if you're going to take the time to screw it in, you should get as much use out of it as you can. Knobs can can if various widths, lengths, and styles so you should try out several different ones to see which will fit with your trim the best.

[WildIrish]

Some people like to have knobs that are purely for decoration but I feel if you're going to take the time to screw it in, you should get as much use out of it as you can.



Excellent, excellent point!!!!! You know how those things go...if someone sees a knob, they're gonna pull it! It's human nature! Thank you for pointing that out!

[wyndhy]

true, true. don't think you have to go out and get the biggest knob you can find. i would even suggest buying plain wood knobs and enhancing them yourself. after careful manual work, like applying some latex, the knob will ususally look bigger.

[Aqua]

If you are really good you can add ridges or 'ribs' to the sides of the knob with careful application of the latex.

[wyndhy]

which would not only enhance the knob visually but really give it some tactile interest, something for your fingers to feel and explore as you pull on the knob.
nice suggestion, aqua!

[Lilith]

back to the pre-drilling.... I have heard and think it is an excellent idea to have two drills at the ready. Just in case the first one doesn't do the trick.

For me, knob choice is very difficult. narrowing my selection down to just one seems to be an impossible task. Why pick up just one knob when it's better to have several on hand. A varied selection will ensure that you always have the right knob for the job.

[Aqua]

Definitely Lil... and it's always good to have an extra tool on hand.

[wyndhy]

and don't forget clean your tools well with oil.... a clean tool works much better than one covered in scum from the last time it was used

[Steph]

The writing in this thread is superb. Kudos! I love the deadpan writing!!!

Where is Lixy to help with the sewing renos?

I would love to join in but I don't my knob from a hole in the ground.

[wyndhy]

deadpan? my dear, i have no idea what you mean. if you have a repair question, just ask. no need to be shy.

i gather you have some sewing questions. here’s a tip i can offer about sewing. needles, the steel implement used to pierce through the fabric, will slide in much more easily if you remember to coat the tip in soap. keep a bar handy when using your equipment.

to thread a needle, first dampen the thread. to do this, draw an inch or two into your mouth, rolling your tongue around it. if you’re using a particularly thick thread, like a cord, this may take time and several licks. keep your lips pressed firmly around the circumference while drawing it from your mouth. this will draw off excess moisture and, in case someone is watching you get it wet, you won’t leave those unattractive tendrils of spit dangling from your chin. now you simply slide it through the hole. take an extra moment to carefully line up both needle and thread so that the insertion is smooth. if the thread bumps into the side of the hole, it will bend and leave a kink that you will need to smooth with your mouth again. you may have to attempt several pokes before you accomplish an insertion but do not be discouraged. with practice, you will soon learn to achieve insertion on the very first try.

some people prefer to use a thimble as protection against pricks, i find that this impedes your ability to really feel each thrust of the needle through the fabric and you can't be sure that the insertion goes exactly where it should. besides that, i personally like the feel of a prick every now and then.

i hope that helps, steph.

[lizzardbits]

another suggestion on the care and upkeep of your knobs, be sure that you polish them regularly. I like to do the spit shine method best.

And another handy tip, for those who enjoy using power tools, be sure that you have plenty of fresh batteries, or a couple on the charger. You wouldn't want to lose power before you get the job done.

[wyndhy]

right now, i'm waiting for the stripper to start working. soon i'll have to get my hand tool and really dig into all those cracks and seams. can't wait to see where this project leads.

[scotzoidman]

Don't forget what Norm Abrams always says..."you can never have too many clamps"...


he also routinely uses glues & screws to hold his joints...